Last Updated： Aggregation Period:Jan 14, 2026～Feb 10, 2026
This ranking is based on the number of page views on our site.
1～30 item / All 42 items
![Portable Slip Resistance Tester "OH-101C" [Rental]](https://image.www.ipros.com/public/product/image/520/2000486348/IPROS46227369026844317243.jpeg?w=280&h=280)
Evaluation of slip on surfaces such as floors, pavements, stairs, ramps, and sports surfaces.
The slip resistance of floors, surfaces, ramps, and stairs is a very important performance aspect in terms of safety and comfort during operation. With the recent increase in awareness of the importance of slip resistance, this portable slip testing device allows for easy and valid measurement of slip resistance on-site.
Can be measured accurately in mg/L (or g/L) O2 with minimal operation.
The COD measurement set includes the main measuring device, COD test tubes (25 pieces, 1 set each for low range and medium range), reactor RD125, and vial stand.
Compliant with JIS K0102! For COD management of wastewater.
It supports a wide measurement range of up to 15,000 mg/L. All reagents necessary for measurement are pre-adjusted; simply place the sample in a vial containing the reagent, heat it for decomposition, and then read the results with the measuring instrument.
CO2を計測し、基準値を超えたら自動でサーキュレーターをON！喚気作業の効率化に ※暑さ指数の表示付き
当社 トラステック愛知が開発した『CO2KeeperNeo』は、 3密をリアルタイムに可視化する、二酸化炭素濃度計です。 二酸化炭素濃度計・温度計・湿度計・時計、さらに暑さ指数計を小さなケースに収納し、 CO2濃度が1000ppmをこえると、換気扇を作動させ換気を促します。 【CO2KeeperNeo 特長】 ■コンパクトなボディに［CO2濃度計・温度計・湿度計・暑さ指数計］のマルチな機能 ■3密をリアルタイムにアラートし、スイッチャで換気扇をON・OFF ■ワイヤレスでPCと接続でき、10台置けば10カ所のCO2濃度測定が可能 ■CO2濃度を常時モニタリングでき、履歴確認もできる ※詳しくはPDF資料をご覧いただくか、お気軽にお問い合わせ下さい。
Accurate measurements, sensors that do not produce false detections! Can be linked to your smartphone with the dedicated app "RK Link"!
The "CO2RK-Lite" is a reliable and high-quality carbon dioxide (CO2) monitor confidently provided by an industrial product manufacturer. It complies with the guidelines established by the Ministry of Economy, Trade and Industry / Industrial Gas Detection Alarm Association. By detecting carbon dioxide (CO2) and informing users of appropriate ventilation levels, it helps reduce infection risks. 【Features】 ■ Accurate measurement with sensors that do not produce false positives ■ Does not react to disinfectant alcohol ■ Reliable, high-quality concentration meter ■ Notifies the status of alarms *For more details, please refer to the PDF document or feel free to contact us.
![COD meter "HC-507" [Rental]](https://image.www.ipros.com/public/product/image/4f2/2000486357/IPROS57568834446252738016.jpeg?w=280&h=280)
This is a COD (Chemical Oxygen Demand) meter that allows for rapid and simple measurement, providing a direct reading of the COD value of the sample water in mg/L units.
This is a COD (Chemical Oxygen Demand) meter that allows for the rapid and simple measurement of COD, which is established as an important indicator of water quality pollution for water use, wastewater, and river water under total water quality regulation. It provides a direct reading of the COD value of the sample water in mg/L. 【Features】 ■ Simplified blank measurement ■ Easy-to-understand operation panel
There is a very high correlation between the measurement values according to the JIS method and the wastewater from various business establishments.
This measurement method maintains the reaction conditions between the pollutants and potassium permanganate identical to JIS K 0102, using one-twentieth of the liquid volumes of the sample and reagents as per the JIS method. Heating at 100°C for 30 minutes is conducted using a reactor instead of a water bath, and the amount of consumed permanganate ions is determined by measuring the decrease in absorbance with a photoLab 6100 water quality meter, which displays the COD concentration. Since the reaction conditions of this method are exactly the same as those of the JIS method, there is a very high correlation between the measurements obtained by the JIS method and those obtained using the photoLab 6100.
High correlation with the JIS method!
Due to the same reaction conditions as the JIS method, a high correlation can be obtained. The amount of reagent used is significantly reduced.
Easy to carry! For pharmacological or physiological research on the stratum corneum of the skin.
The "SKICON-200EX-USB" is a skin stratum corneum moisture content measurement device that anyone can easily use. By conducting an in vivo moisturizer efficacy test, it allows for the assessment of the moisture state of the stratum corneum and the evaluation of the moisturizing effects of cosmetics and topical agents. 【Features】 ■ Easy operation ■ Various sensor probes available ■ Focus on low distortion high-frequency sine voltage and linearity ■ Easy data processing ■ Lightweight *For more details, please refer to the PDF materials or feel free to contact us.
Introducing a portable Type 2 testing machine equipped with a cutter, compliant with EN13144 and ISO 4624!
The "Elcometer 106" is a pull-off adhesion tester that allows you to read the adhesion of coatings in numerical form. It can be used for testing painted surfaces, plasma-sprayed decks, steel, aluminum, and concrete. It comes with a storage case, making it suitable for on-site testing. Additionally, it includes a cutter compliant with EN13144 and ISO 4624. 【Features】 ■ Easy to use ■ Portable ■ Allows numerical reading of coating adhesion ■ Comes with a storage case – ideal for on-site testing ■ Manual operation – no power supply needed *For more details, please refer to the PDF document or feel free to contact us.
It is a pocket-sized foldable non-contact infrared thermometer/center temperature gauge that can measure surface temperature and center temperature.
It is equipped with a K-type thermocouple sensor with a diameter of φ3.3mm and a length of 120mm. It can handle various temperature measurements with one device, such as checking the acceptance temperature of raw materials and measuring the surface temperature of products as an infrared thermometer, as well as measuring the core temperature of products as a K-type thermocouple. The emissivity can also be adjusted according to the measurement target for non-contact temperature measurements.
Contributing to the reduction of auxiliary fuel and CO2 emissions! Introducing the electromagnetic sludge concentration/moisture content meter.
Introducing our electromagnetic wave-based sludge concentration/moisture content meters, 'Valmet DS & Valmet HS.' The measurement principle is based on microwave technology, where the screw unit of the DS/HS captures falling samples, which are returned to the process after measurement. This product contributes to the optimization of chemical usage, torque adjustment of dewatering machines, and reduction of auxiliary fuel and CO2 emissions. 【Features】 ■ Measurement principle based on microwave technology ■ The screw unit of the DS/HS captures falling samples, which are returned to the process after measurement ■ Optimization of chemical usage ■ Torque adjustment of dewatering machines ■ Reduction of auxiliary fuel and CO2 emissions *For more details, please refer to the PDF document or feel free to contact us.
![COD meter "HC-607" [Rental]](https://image.www.ipros.com/public/product/image/e79/2000454655/IPROS47553701898948359179.jpeg?w=280&h=280)
COD (Chemical Oxygen Demand), used as an indicator of water quality pollution by organic substances, can be measured simply.
■ Simplification of blank measurement By reviewing the electrode material, it is freed from multiple blank measurements, making the measurement operation faster and more stable. ■ One-touch method for sliding the electrode holder with one hand The up-and-down motion of the electrode block is a one-touch method, resulting in smoother operation and improved work efficiency. ■ Safer and more reliable attachment and detachment of electrodes The electrode and lead wire are integrated, improving current efficiency and contact failure. Additionally, attachment and detachment to the electrode block can be done easily, safely, and reliably. ■ Pre-alarm timer set for oxidation decomposition time In addition to an alert sound notifying the end of oxidation decomposition, the pre-alarm timer alerts you with sound as the end approaches, so you are not bound by waiting time. ■ Strong volumetric titration method for colored samples ■ High-precision measurement using the second derivative method for endpoint detection ■ User-friendly operation panel with touch keys and interactive method
Just display the guideline line for penetration speed! Anyone can measure at a constant speed!
The DIK-5532 is a digital penetration soil hardness meter capable of measuring soil hardness from 1cm to 90cm (in 1cm increments). Measurement data is obtained using a dedicated data display unit (featuring a touch panel). Bluetooth communication eliminates the need for cumbersome cable wiring. Additionally, with the optional mobile printer, it is possible to print graphs and measurement data on-site. 【Features】 ■ Measures soil hardness from 1cm to 90cm (in 1cm increments) ■ No cable wiring required ■ Capable of printing measurement data ■ Measurements can be taken at a constant speed ■ Easy to operate *For more details, please refer to the catalog or feel free to contact us.
Real-time updates approximately every second! Cordless USB rechargeable carbon dioxide concentration meter.
This product is a carbon dioxide concentration meter that can be used as a guideline for ventilation and human density. It features an easy-to-read carbon dioxide concentration display that updates in real-time approximately every second. It is cordless and rechargeable via USB, and comes with a CO2 sensor installation sticker. 【Features】 ■ Can be used as a guideline for ventilation and human density ■ Real-time updates approximately every second ■ Easy-to-read carbon dioxide concentration display ■ Cordless and rechargeable via USB ■ Comes with a CO2 sensor installation sticker *For more details, please refer to the related link page or feel free to contact us.
It is possible to detect the corrosion condition of rebar in concrete.
The HC200 concrete rebar corrosion inspection device can detect the corrosion state of rebar in reinforced concrete without significantly damaging the concrete, using the natural potential method. Additionally, it is possible to create contour maps using the potential data from the HC200 and mapping software such as the HC200 contour mapping program CD or commercially available software like SURF. 【Features】 - Accurately checks and monitors rebar corrosion in reinforced concrete. - Rebar corrosion diagnostic device using the natural potential method. For more details, please contact us.
In a one-minute measurement, the wet density, moisture content, dry density, water ratio, compaction, and air void ratio can be determined.
The "FT-102 Series" is a moisture density gauge used in the field by organizations such as NEXCO and the Ministry of Land, Infrastructure, Transport and Tourism for soil compaction management. It measures soil moisture and density using radioisotopes (RI). It allows for rapid testing of the moisture density and water content ratio, which are essential for quality control testing of embankments. 【Features】 ■ Displays moisture density, water content ratio, dry density, etc., in 1 minute ■ Equipped with a radiation source alarm function ■ Standard statistical calculation of results ■ Operation menu displayed in Japanese ■ Prevents erroneous operations with error displays and alarms ■ Measurement data can be recorded as electronic data (optional) *For more details, please refer to the PDF document or feel free to contact us.
Low maintenance, high stability and responsiveness, corrosion-resistant fluorescent dissolved oxygen sensor (manufactured by In-Situ, USA)
This is a simple and low-cost dissolved oxygen sensor that is ideal for applications such as industrial wastewater, aeration tanks, raw water management for food and beverage manufacturing, and fisheries research and aquaculture. While the conventional model RDO PRO required sensor cap replacement once a year, the RDO Pro-X has eliminated that regularity, resulting in lower maintenance (however, since the sensor cap is a consumable, replacement is still necessary).
Emergency Drinking Water Quality Testing Kit
On-site water quality testing can be easily and accurately conducted to determine the suitability for drinking. It is also ideal for emergency situations in addition to regular water quality testing.
We will actively challenge ourselves to develop our own new technologies and products, as well as to introduce excellent technologies and products from around the world.
Daiki Rika Kogyo Co., Ltd. is a manufacturer of soil moisture meters, soil physical property measurement instruments, soil hardness testers, bulk density measurement devices, groundwater measurement, and groundwater sampling equipment. Since its establishment in March 1941 as "Shoko Rika Seisakusho," our company has continuously developed and commercialized new instruments in collaboration with researchers who seek innovative solutions. The sincere cooperative relationship with these researchers has formed the foundation of our company's growth, allowing us to establish a solid position as a manufacturer of soil physical property measurement devices in Japan through our focus on "soil." To protect the rapidly changing global environment, we believe it is our responsibility to practice and realize our corporate philosophy of "protecting soil and water." We will continue to actively challenge ourselves in the development of new technologies and products, as well as in the introduction of excellent technologies and products from around the world. 【Product Line】 ■ Three-phase distribution measuring instruments ■ Particle size analyzers ■ Soil and moisture measuring instruments ■ Soil air, oxygen, temperature, and mechanical properties ■ Environmental testing equipment ■ Plant physiology measuring instruments ■ Environmental survey equipment *For more details, please refer to the PDF materials or feel free to contact us.
![Comprehensive Catalog of Environmental Measurement Devices [Currently Available for Free!]](https://image.www.ipros.com/public/product/image/0e7/2000167955/IPROS25330847442591115254.png?w=280&h=280)
There are also implementation results at Yokohama Landmark Tower! For those struggling with building air conditioning and indoor environment management!
Ai Electronic Technology Research offers a wide range of environmental measuring instruments perfect for building air conditioning and indoor environment management, and we provide thorough support for maintenance after installation. Currently, we are giving away the latest comprehensive catalog of excellent environmental measuring instruments, including those used for air conditioning management at the Yokohama Landmark Tower, for free! 【Featured Products】 ■ Hot-wire anemometers and flow meters ■ Electronic thermohygrometers ■ Thermocouple thermometers ■ Static pressure and differential pressure gauges ■ Lux meters and CO2 meters 【Types of Uses and Locations】 ● Building air conditioning, clean room management, indoor environment management ⇒ (Handheld type) ● Indoor environment, industrial equipment management ⇒ (Handheld type / Portable type / Analog portable type) ● Industrial equipment management ⇒ Wide temperature range hot-wire anemometers and thermometers ⇒ Panel-mounted anemometers and flow meters ⇒ Installed anemometer and flow transmitters ⇒ Panel-mounted multi-point anemometers and flow meters ★ If you would like it now, click "Download Catalog"! ★ If you prefer to receive it by mail, please contact us.
It is a soil moisture meter with approximately 3 seconds measurement and built-in data logger function.
By directly inserting the sensor into the soil, measurements can be taken in approximately 3 seconds. With a built-in logger, it is also effective for measuring changes over time. The sensor switching function allows customers to adjust the sensor length. The lightweight and compact design of the main unit makes it convenient to carry. It comes with dedicated software, enabling data management on a computer.
Demonstrating power in improving civil engineering management! A RI moisture density meter utilizing advanced technology.
The "ETL-10 Series" is an RI moisture density meter that can be measured on-site at a rate of one point per minute, with just 5 minutes of warming up and 20 minutes for standard (reference body) measurement, performed once a day. It features a source rod loss prevention function that warns with a light-emitting diode and buzzer when the source rod is detached from the instrument body. Additionally, the source rod transport container can be used safely as a storage container while the source rod is attached to the instrument body. 【Features】 ■ Design certification obtained ■ 10EX type is a certified model by NEXCO ■ Measurement time is 1 minute ■ Instant printing of measurement data ■ Data transfer system is standard equipment *For more details, please download the PDF or feel free to contact us.
